Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Anaheim Homeowners
Gate installation in Anaheim is a decision that follows you around for a decade or more. A driveway gate that sags, a pedestrian gate that binds against the post, a slide track that was never set level: these are not nuisances you adjust to, they are defects you look at every time you come home. Since 2014, Adrian Vance and our installation crews have built gates in Anaheim, Yorba Linda, Villa Park, and across Orange County the way we would build them on our own properties: measured twice, set level, welded or bolted to manufacturers’ torque specs, and priced in writing before anyone picks up a tool. We answer our own phone 24 hours a day at (657) 567-5799, and the person who answers is a dispatcher or a technician, never an answering service. Most Anaheim installation estimates are delivered within 24 to 48 hours of your call, and the written price you receive is the price you pay.
What Our Gate Installation Service Includes
Every Gate Installation in Anaheim starts with the same three questions: what does the gate need to do, how is it going to be powered, and what is the soil bearing under the posts. We write the answers down. Here is what each type of installation actually involves, and when it is the right call for your property.
Driveway Gate
A driveway gate is the primary vehicle entry to your property, usually a swing or sliding configuration spanning 10 to 20 feet. Anaheim lots range from compact mid-century parcels in the Colony to larger horse properties in Yorba Linda, and the gate width follows the lot. We measure the actual travel path, not just the opening, because a gate that clears the driveway on paper can still strike a sloped apron or a planter on the swing arc. Installation includes the gate frame, hinges or track, post setting, motor mount, and a full photo record of the finished work.
Pedestrian Gate
A Pedestrian Gate provides a separate walk-through entry alongside or within the driveway gate, typically 36 to 42 inches wide. This is the gate you use to grab the trash bins or let a delivery in without opening a 400-pound driveway leaf. We install pedestrian gates with their own strike plate, closer, and latch, built to carry daily use without sagging on the hinges. The frame is set independent from the driveway gate so neither gate transmits movement into the other.
Sliding Gate
A sliding gate travels horizontally along a track or beam instead of swinging, which makes it the choice for Anaheim homes with a steep driveway or a vehicle parked close to the gate’s arc. The track has to be perfectly level, or the gate will bind and overload the motor over time. We set the rail with a laser level, verify the cantilever balance after the gate is hung, and photograph the final track reading for your job record. If the grade of your driveway rules out a swing, a slide is usually the fix.
Swing Gate
A swing gate pivots on hinges set into the posts or columns, and it is the most common style for Anaheim homes with a level entry and enough setback to clear the arc. The two things that fail on a swing gate are undersized hinges and posts that were not set below the frost-free depth for our region. We size hinges to the gate leaf at least one gauge heavier than the manufacturer’s minimum, and we set posts in concrete at a depth that holds the gate under repeated motor cycles. You get a written record of the hinge part number, the post depth, and the opening speed after final adjustment.
Double Gate
A double gate is a pair of swing leaves that meet at the center, used for wider driveways where a single leaf would create too much hinge load. Both leaves have to strike each other in the same plane, or the gate develops a gap or an alignment fight over time. We hang both leaves, set the center stop, and adjust the closer or motor limit switches so the leaves close evenly and the latch engages every time. If you are replacing an existing double gate, we also check the original posts for plumb and recore them if the concrete has cracked around the old anchors.
Security Gate
A security gate is built with a heavier frame, positive latching, and usually an access control system, not just a remote. The distinction is not the style; it is the failure threshold, which is why we weld or through-bolt security gate frames and install a magnetic lock or electric strike that fails in the position you specify. In Anaheim, a security gate on an inner city lot is often installed to control alley access, while a security gate on a canyon property in Villa Park is often designed to stop vehicle entry entirely. We walk through the lock logic with you before we order anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and automate gates from nine major manufacturers, and we keep enough brand experience on the truck that we do not need to steer you toward a motor we happen to sell. Ghost Controls is the brand we most often install on homeowner-managed gates, because the controls are accurate, the remotes are affordable, and the travel limits do not drift after a power outage. We have set up hundreds of Ghost Controls units on swing and slide gates in Anaheim, and we photograph the limit-switch settings before the cover goes back on.
Viking and DoorKing are the two brands we recommend when the gate is heavy, the cycle count is high, or you want an access control system tied into the motor. Viking operators hold up well on long slide gates and industrial-style driveway leaves; DoorKing is our default when the customer wants a telephone entry system or a hard-wired keypad at the same time as the gate. Whether you have one of those brands already or you are starting from scratch, we will work on whatever is on the property and quote the installation honestly, including the brand we think fits, and the reason for it.
BeforeAfterSigns You Need Gate Installation Right Now
- The gate drags or scrapes the ground on every cycle. This is usually a hinge or wheel failure that has already started eating the frame. Continuing to run it widens the metal fatigue until the gate is beyond repair, and replacement becomes the only option.
- The gate is off its original mounting and repaired frequently. If you have had the same gate repaired twice in eighteen months for the same sag or the same motor fault, the cost of repair has likely passed the cost of a properly set new installation. We will tell you which side of that line you are on, with the numbers in writing.
- You want keypad or remote access but the existing gate was never built for automation. Retrofitting a motor onto a gate that was not designed for one often means replacing the hinges, the closer, and the post hardware anyway. A new gate and motor installed as a matched set costs less over time.
- The posts have moved. A post that is no longer plumb will keep loosening any gate hung from it. New gate hardware on a moving post is a repeat failure. If the post has shifted, the installation must start with new posts set below grade.
- The gate cannot be secured at night. If the latch no longer throws, the lock is seized, or the gate has no locking point at all, that is a security hole that every other part of the gate was meant to close. An unsecured gate is not a minor inconvenience; it is an open perimeter.
Our Gate Installation Process - Step by Step
- 1
Measure and document. We come to the property, mark the post locations, measure the travel path, and check the ground for grade changes. We note the existing access control wiring, even if the customer thinks it is dead, because a usable power run saves real money. You receive a written scope of the work, including post depth, gate width, motor model, and the price.
- 2
Set the posts and frame. Every post goes in below grade, set in concrete, and checked for plumb with a digital level. This is the part of the job that determines whether the gate still works in ten years, so we do not rush it or reduce the post spec to shave the quote.
- 3
Hang the gate and align the leaves. The gate leaf or leaves go on, hinges are torqued, and we adjust the strike, latch, and closing speed. If the gate is automated, we set the limit switches to stop at the correct travel and verify the reversing function before we call the install done.
- 4
Program the operator and any access control. Remotes and keypads are programmed, entry codes are set, and if the customer has a telephone entry or card reader, we tie it into the motor and test the full sequence. You get a written list of what was set and how to reset it, plus the photos.
- 5
Document the finished job. Before we leave, you receive a photo log showing the post set, the frame, the motor mount, and the final travel readings, along with a written record of every part number installed. That is the Haven Standard, and it applies on every single visit, not just the big installs.
How Much Does Gate Installation Cost in Anaheim?
A Gate Installation pricing for a pedestrian gate in Anaheim typically runs $1,100 to $2,800 depending on the frame material, latch type, and whether we are setting new posts or anchoring to existing columns. A single swing driveway gate with automation generally runs $3,500 to $7,500 installed, including the motor, remotes, and photo-eye. A double swing or slide gate, especially with a heavy steel or wood frame and an access control keypad, runs $6,000 to $14,000 based on span, operator, and the condition of the existing power at the gate. Those are the honest Anaheim ranges, and the price we quote you in writing includes material, labor, but not the fee surprises other companies add at the end.
What moves the price: gate width, single vs. double leaf, the operator brand, whether new concrete work is needed, and whether access control is part of the scope. What does not move the price after we quote it: our labor. You get the price in writing before work starts, under Haven Standard Clause 1, and if the scope changes during the job we stop and agree on the new line item before touching it. The free estimate includes all of the measuring and the written scope, so you can compare the number honestly against any other quote in Anaheim.
Gate Installation Near Anaheim - Our Service Area
We install gates throughout Anaheim and the surrounding Orange County cities: Yorba Linda, Villa Park, Fullerton, Orange, Santa Ana, Tustin, and North Tustin. For properties in Irvine, Corona, and Chino Hills, we schedule installation visits on the same measured-and-quoted basis, usually within one to three days of the site visit. If you are inside Anaheim city limits, we can typically have a technician out for the measure the same day or the morning after you call.
Serving Anaheim, CA - Our Local Coverage Area
We’re based in the Anaheim area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Anaheim
Gate installation means setting new posts, hanging a gate leaf or leaves, and often wiring and programming an electric opener and access control system. It can range from a single pedestrian gate to a full automated double swing Driveway Gate. In Anaheim, Vance Gate Repair installs both, with a written price and a photo record on every job.
A pedestrian gate with new posts takes one working day in most Anaheim conditions. A single automated swing gate takes one to two days, and a double or slide gate with concrete work and access control takes two to three days depending on the concrete cure and the wiring present. We give you the timetable in writing at the estimate, and we hold to it.
Pedestrian gates run $1,100 to $2,800, single automated driveway gates run $3,500 to $7,500, and double or sliding gates run $6,000 to $14,000 installed. The written quote includes everything: posts, frame, gate, motor, settings, and photo documentation. Call (657) 567-5799 for an exact number, and bring any other written estimate for a free second-opinion review.
Yes. We install and automate Ghost Controls, Viking, DoorKing, and Elite operators, plus several other major brands, and we service all of them after the install. We will not push you into replacing a motor we can program and adjust. If you already have a brand on the property, we work with it.
We keep installation crews available for security-priority jobs, such as a gate that will no longer close or latch and is leaving the property open. A live person answers 24 hours a day, seven days a week at the number on this page. For non-security installs, we schedule the measure and the build in the next available slot, which is usually within a few days in Anaheim.
Every completed installation carries our 365-Day Done Right Promise: if the work is not right, we make it right, no argument, no fee, and no expiration dispute within that year. The equipment itself carries the manufacturer’s warranty, and we register the product with the brand on your behalf. You also leave the job with a written record of part numbers and photos, so warranty work is easy to file.
Clear the area along the gate’s travel path and the post locations, and move any vehicles out of the driveway before the crew arrives. If you have a keypad or entry code you want to keep, have that written down so we can program it in. We handle all the rest: post holes, concrete, wiring, and the final adjustment, plus the documentation on the way out.
Schedule Your Gate Installation Service in Anaheim Today
You will get a written price before any work starts, a documented photo record when the job is done, and a one-year make-it-right promise on every installation. Call (657) 567-5799 for a free, no-obligation estimate, or bring us the written quote from any other Anaheim gate company and we will review it at no charge. A live person answers, day or night.
Written by Adrian Vance, owner of Vance Gate Repair, serving Anaheim since 2014.